The 4' wide Power tool from QuickWood is called the F6, this tool will sand 4" in width and run at around 900 rpm. This sander is great for sanding moldings and cabinet doors,This product is hand tool only please remember to...
translation missing: en.general.accessibility.error Quantity must be 1 or more
The All new F1 with optional head is a very light weight power sander easy to use for sanding profiles and details. This product comes with Free shipping in USA. Great for sanding before stain and sealer and for sealer sanding. Makes...
translation missing: en.general.accessibility.error Quantity must be 1 or more
The weathered brush works on hardwood and softwood, to remove the soft grain of the wood to leave a weathered or high/low grain look on the work piece. The wood will look like years of wear as the soft wood is gone...
translation missing: en.general.accessibility.error Quantity must be 1 or more
After using the weathered brush you should use the flap-wheel head in a grit p150 to clean up the wood and to make it ready for stain and sealer. This gets you both products.
translation missing: en.general.accessibility.error Quantity must be 1 or more
This comes in 4", 8" or 12" spindle that fits a 3/4" arbor, the new twisted steel is made for heavy distressing on hardwoods. Its heavy and that is why we put in on a spindle that goes to a motor. The...
translation missing: en.general.accessibility.error Quantity must be 1 or more
The head comes with a 3/8" drill pin coming out from the head, the head is 2" in width and it takes 3 twisted steel heavy duty rustic brushes. The weight of the tool is really important and 2" width feels good at 4...
translation missing: en.general.accessibility.error Quantity must be 1 or more
This spindle can hold a flap wheel or rustic steel brushes. It's made with a 3/4" bore and set screw for attachment to your own motor. This spindle should be turning 400-500 rpm for white wood sanding with flap wheels and 500-600...
translation missing: en.general.accessibility.error Quantity must be 1 or more
Spacers are used to secure the deburring discs to the spindle, these spacers come in different arbor sizes for different machine brands.
32mm - Box of 50pcs. (part# 50700)
50mm - Box of 50pcs. (part# 50900)
translation missing: en.general.accessibility.error Quantity must be 1 or more
Mixed box of QuickWood sanding sponges 25 pcs. of each grit. p100, p120, p180, p220Quickwood sanding sponges are virtually indestructible as they are made from a new adhesive and grit combination. Size 4 3/4" x 3 7/8" x 1/2" thick. Abrasives on...
translation missing: en.general.accessibility.error Quantity must be 1 or more
With these 3 tools you can do anything in rustic sanding. The steel will rip the wood, the tynex will make the wood look weathered and the flap-wheel will clean up the rustic sanding and make the wood ready for stain and...
translation missing: en.general.accessibility.error Quantity must be 1 or more
This is the pneumatic drum sander with a handle on one side. Its 75 -115 (3" x 4.5:) with a length of 4" and an 8mm (0.30") shank to insert into a drill chuck. This would be a tool you used to...
translation missing: en.general.accessibility.error Quantity must be 1 or more
The pneumatic sanding drum 220/230 (8.66" x 9) with a 30mm bore (1.18") used for sanding coming with a p80, p100, p120 grit sandpaper. The pneumatic drums can be inflated to the right pressure for sanding small contours. A bushing could go...
translation missing: en.general.accessibility.error Quantity must be 1 or more
“The flap sander came in and we knocked out nearly 500 ft. of trim in a timely manner. Purchased the 100 grit inserts and the design conforms to moulding profiles great. Truly a labor saving addition to our cabinet shop. Thanks for your product”